I attempted to calm my nerves today. I went down to the garage and worked on the soft top for a couple of hours. I took lots of internet pictures with me. I have been unable to get anyone with a real 34 Tudor to give me accurate dimensions so I said F%@K it and just winged it. I measured and measured and using painters tape have it all laid out. The wife gave me a hand. Stretching the tape out over an 8 foot span is pretty tough to do alone. I used a 7" cutoff wheel to form the front corners and a 9" cookie plate to form the rear corners. I put a slight bow in either side because they didn't come straight from the factory. Then I came upstairs and remembered that I have a 1/25 scale model of a tudor sedan. I'm going to pull some dimensions and see how close I am. I kinda like it where it is so I may just start drilling holes. The nicest part was a couple hours of total bliss not thinking about anything but the car and my sweetie by my side.
https://scontent-lga3-1.xx.fbcdn.net...a7&oe=571070D3
https://scontent-lga3-1.xx.fbcdn.net...d1&oe=56FE5625
https://scontent-lga3-1.xx.fbcdn.net...b6&oe=56FC918F
https://scontent-lga3-1.xx.fbcdn.net...a0&oe=571F6A3B