Thread: 1940 Ford Pickup
Results 1 to 15 of 1085
Threaded View
-
03-14-2024 08:24 PM #36
Did some needed updating on the truck. I replaced the frame mounted fuel pump with a in tank pump and replaced about 18 feet of rubber fuel line with stainless steel line . Its so much Quiter now , don't hear the pump tank at all. Cutting the 3.25 inch hole in the stainless tank was pita, used up 2 hole saws.

Made some blocks to hold the lines. pic shows pressure line installed using gas line as a gromet, return line fills the other hole.
Last edited by Navy7797; 03-14-2024 at 08:32 PM.





815Likes
LinkBack URL
About LinkBacks
Reply With Quote
Turn out the lights, the party's over THIS PLACE IS DEAD!
Dead!