I think 1994 was the first year and they continued it all the way up until 2007 if not until current. Sorry for the bad picture. :LOL:
Printable View
I think the move to stagger rear shocks came with the mid 60- early/mid 70s on the mustangs and then the Camaro /novas that were track raced with the boss302 and sbc 302 in that road racing era of the small block muscle cars---spread to the bigger engine mustangs and others---later Ford even went to 4 shocks on the rear of mustangs--don't know what year off top of my head but they had two shocks normal location and two more above axle length wise with otter frame rail---------
Navy---try a spruce 2 x 4!!!!!!!!!whats your deal with the plane??????
Jerry 2 x 4 aircraft quality spruce cost more than steel !
The plane is a French 1917 Spad XIII . Took 4 years to build. All built from raw materials except the engine and the lower fuel tank. Myself and 3 others worked on it. I did the wings, sheet metal and the pluming, oil, water, fuel and air pressure lines which were a nightmare. No detail was to small. My boss had the Original French plans translated to English, all measurements were metric. This was built for a collector in Calif.. There was so much more to it than can be described, ie: shutters over the radiator controlled by the pilot as he watched the temp. no thermostat in the 700 cid v-8 with a gear box reduction at the prop. 2 Vickers machine guns mounted on the top of the cowl.
The french pilots must have been small because I couldn't get in the cockpit, no leg room. Got tons of pic's if you want to see them.
Back to the Hotrod.
You posted pictures of the Spad earlier in another thread didn't you? Sure seems like I had seen it before, and I recall the fantastic wood work in it, and the details in the construction. Beautiful!!
Navy, I for one say post up a thread on that bad boy when you have time. I love early war birds. I'm sure I'm not the only one here either.
Earliest staggered shock setup I know of was in the 68 Cobra Jet Mustang.
Navy, enjoyed the plane pics again! Yes, please do a thread if you find the time! That is just beautiful..
I'll offer an opinion on your shock setup.. leave it alone and see what it drives like.. then decide! Hey! You ASKED! :eek::LOL::LOL::LOL:
Yes please post some more plane pics. Beautiful work from what I could see!
And so it begins . Here's some pic's from todays work.
1st a new cross member cut to length. The question for this is how much lean forward and inward for the shocks ? http://i990.photobucket.com/albums/a...ps725415c6.jpg
2nd The steering. The pic's show's "tack welded" steering heim joint brackets. The routing of the shafts are what I see as working. What do you think, does it look right ?http://i990.photobucket.com/albums/a...ps8996efa8.jpghttp://i990.photobucket.com/albums/a...ps1e8979d1.jpghttp://i990.photobucket.com/albums/a...psbeb2aeb9.jpghttp://i990.photobucket.com/albums/a...ps2ce3e349.jpghttp://i990.photobucket.com/albums/a...ps8b389721.jpg
You only need the rear most heim and you can eliminate the rag joint---the steering component companies have u joint assy with a dampner incorporated into the u jpoint---also , I'm sure this is just a mock up pic and you will phase the two upper joints so that they are correctly in phase , other wisw you will get a feedback that's kind of notchy from the steering
Jerry: Thanks for the feed back. I know the rag joint is ugly but does it pose any troubles, its just another item I spent money on and hate to buy something else ? The reason I put it in was to compensate for any movement of the cab when there's frame twist/flex. I don't know I maybe way off with that.
Is the phase of the 2 lower joints correct ?? I don't know whats correct.
I'm looking for an education here as to this items, I like to know the what and whys.
I REALLY do appreciate your in puts !
Here's another look at the new shock mount set up. I'm going with 2 forward of the axle. As they sit they are 6" forward and 4" leaning inward, shocks are fully extended and wheels off the ground. Is this OK or what would be better ??
http://i990.photobucket.com/albums/a...pse4ac15e2.jpg
http://i990.photobucket.com/albums/a...ps8d12451e.jpg
http://i990.photobucket.com/albums/a...pse4ac15e2.jpg
Shocks look fine, maybe tap the top down a few 32nds so it'll lessen the chance of the shocks carrying the weight.
Go here and see a bunch of drive line stuff that'll help, Driveline 101
Gordy, with most of these threads that I follow, including my own, I always learn way more than I ever contribute!! Thus, I look forward to responses regarding suspension, etc. since some of what I learn here may affect how I continue with my own project.:)
I'm certainly no frame or suspension guru of any kind but since you have boxed your frame and added that beefy x-member, I would think you've removed the lion's share of the twisting & flexing, compared to how Henry originally made it. Plus, I highly doubt you'll ever be hauling a 1/2 ton of gravel or a thousand pounds of plywood in it. I say all that because some of your concerns about suspension travel & frame flexing may never be an issue for this truck given how you're probably going to drive it. Just a thought...
As always, looking forward to the next wave of comments & progress. :3dSMILE: