Thread: 51 Moredoor

Tweet

Lots done today. I got the rest of the stuff Im not using stripped off the motor. The plan is to go without A/C or PS. It looks like it will work fine, I'm just going to have to make a bracket for the alternator that will adjust the belt. The belt tensioner was part of the PS bracket so no good there. I had to grind a litte notch on the inside of the five speed bellhousing so that it would bolt up to the motor but it was a piece of cake after that. So I've got it sitting between the rails and its got a few issues to work with but nothing too drastic. It's going to need a little firewall surgery so that the motor will go back a few more inches. Right now the oil filter will hit the steering box. I may try to come up with something to relocate the filter altogether; got to do some thinking on how to accomplish that. Shifter placement looks good, np problems there. The tie rod is dead center on the oil pan so the pan may need some notching, and it looks like custom headers will have to be built. Im going to try and alter a set of factory 3.8 Mustang headers and see how that works. Fun stuff, though.