Thread: Project "Left Overs" is back alive !

Tweet

Lamin8r, what does 4 mm relate to in inches ?...........I'm terrible with math.

Don

.157'' or approx 5/32""

Don - I'll bet he's in bed now.
1mm = .039 inches
25.4mm = 1 inch
4mm = .157 inch
.157 = ~5/32nds

Guess I have to be quicker then the standard Canadian

Ah, that is almost 3/16, so they really do hold them to a high standard. Thanks guys for doing the math for me.

Realistically, I could have used 1/8 inch wall for this one, especially since I went 2 x 4, but I just feel better with the extra thickness there. (Well, I'm not feeling so good about it this morning............every muscle is hurting from lifting that baby last night, and it keeps getting heavier all the time. ) We were laughing about it last night because it took four big guys to carry Dan's frame one time, and they were straining. We might err on the side of heavy when we build these things.

Don

Originally Posted by Itoldyouso

Lamin8r, what does 4 mm relate to in inches ?...........I'm terrible with math.

Don

Dunno,,I couldnt remember either.. Just had a look at the LVVTA manual,that we use for guidelines..and we are still allowed to use 3x2 box with 1/8''wall,but a lot of guys are using 1/4'' wall..Minimum size..
Yes,Dave W,,I was asleep,,it was 4.22am when Don asked the question.. If you want to have a look at what we have to do to put a scratch built car on the road in NZ,,try this out..
Low Volume Vehicle Technical Association Incorporated..
You will probably need a degree in lawyer speak to understand it..Makes ya read it a couple of times before you actually do anything..sorta read twice,cut once,if ya get my drift..

Pat, I may be using the wrong term when I say "align bored". It may be that he just hones it to true everything up. The machine I saw had thick steel plates that grabbed the block (block was upside down in the machine) and it had a fixture going through the cam bearing holes, and another fixture going into the main caps. I only looked briefly and didn't know what I was looking at anyway.

Steve, that bandsaw has been one of the best investments we made, well actually that Dan made. He bought that some years ago and I couldn't even begin to guess how many cuts it has made and how troublefree it has been. It still has the original belt on it and we have only replaced the blade maybe 4 or 5 times in all those cuts. Every time we make a cut with it, especially some odd angle or shape, we say "How would we do this without this saw?" and in fact I just said that tonight as we were cutting some stuff.

As for the frame creation, I really have to give credit for those to Dan. I'm prejudiced, of course, but he is really smart when it comes to figuring out how to do something the right way. I had one vision for what I wanted this frame to be, and he took it to the next level, and he usually does that when he gets involved with one of my builds. He drives me nuts sometimes because he won't bend, but in the end he is usually right.

And now...........TA DA !!!!!!!!!!!!! I have a (mostly) finished frame to post pictures of. Dan and I worked on getting the front and rear crossmembers built and welded in place, and got the initial grinding done. I love the way it came out. It is perfectly square, very strong, and will give me a great platform to build the rpu on. Now I can start making a front perch and getting the front suspension figured out. Once that is done I can move on to the backside. The plan seems to be that I am going to use a four bar setup with coil overs. None of it will show, so a more modern rear suspension won't detract from the old timey look I want.

Here are some pictures from tonight. We are both tired and sore, but feeling pretty happy right now. This is the look I was after. I didn't want the usual round front crossmember, and once the perch is in place and the Moon tank mounted it will look much narrower. The frame is 25 1/2 inches wide in front and 34 1/2 wide in back.

Don

yep,,nice looking frame,Don..I,too,noticed that flash saw,and thought it would be a neat addition to any workshop,,and then thought,,,nah,dont need one,most of my work is in glass...

Thanks, Lamin8r. From time to time we use that saw to cut lumber too. Anytime we need to cut down a 2 x 4 or other piece of wood we toss it in there and it goes through it like butter.

Don