Next thing to do was to bring the metal in and back to meet the bezel. I made a plate the same shape as the headlight to start the process.



Then a slathering of bondo to see how she looks with the 37 headlights.....




It was at this point I started visiting the metalshaping sites and learned how to make a flexible shape pattern.




It was about the exact time I was doing this that one of the guys on MetalMeet invited me and a few other guys down to his place to learn a bit.
I took a flat sheet of metal with me and came back with my first shaped piece.
I tacked it to a new, thicker plate and then it was time to operate....