Thread: New Home Made C-Cab !!!!!!
Hybrid View
-
03-16-2011 08:30 PM #1
The four 3'' pipes isn't for exhaust,, They will be holding the 4 59 Caddy tail lights..
Set no Limit's on yourself !!!!
''life is only a temporary assignment ''
-
03-18-2011 11:07 AM #2
This is exceptional, Randy. You definately will make a name for yourself with a build like this.
-
03-18-2011 12:48 PM #3
Thanks guy's... I was shooting for a car like the pizza wagon... I wanted something that would hopefully be remembered for a long time... Well I have some new pictures that I hope will keep the fire burning here...Thanks again Guy's... It means a lot to me..Set no Limit's on yourself !!!!
''life is only a temporary assignment ''
-
03-18-2011 02:00 PM #4
Oooooh yaaahh!!! Always a classic touch from that era! :-)~
-
03-21-2011 08:08 PM #5
Thanks... Here's something I added today... Hope it will make the interior pop when it's all done..Not finish with it yet... But this may give you the picture I'm shooting for..Set no Limit's on yourself !!!!
''life is only a temporary assignment ''
-
03-21-2011 08:09 PM #6
couple more..Set no Limit's on yourself !!!!
''life is only a temporary assignment ''
-
03-21-2011 08:44 PM #7
People will appreciate the extra effort when they look inside!
-
03-22-2011 06:46 PM #8
Nothing like welding overhead!
That looks awsome though!
-
03-22-2011 10:00 PM #9
Thanks...
Not to much welding was done on the overhead.... I built it on my table and welded it all up before putting it in the car... Much easier...
Set no Limit's on yourself !!!!
''life is only a temporary assignment ''
-
03-23-2011 05:15 AM #10
In my part of the country, this would be covered in surface rust, AKA "patina" in the morning!
you do fine execution of a very novel idea.
Thanks for sharing your progress
-
03-25-2011 09:44 PM #11
Added a round bar along the bottom of the body to give it a little flare when it's all done..Set no Limit's on yourself !!!!
''life is only a temporary assignment ''
-
03-26-2011 02:03 AM #12
That bar/tube at the bottom gives it a nice soft looking edge.
I was just wondering what this will weigh when done ???Its aweful lonesome in the saddle since my horse died.
-
03-26-2011 09:44 AM #13
-
03-26-2011 06:28 PM #14
Cool; what kind of drivetrain are you setting up for this beast?
-
03-26-2011 07:03 PM #15
Well I have a vortec 350, I was thinking about building a intake to run 8 side draft carburetors.. Really not sure yet... But it will get the treatment..
I have a 9'' sitting under it right now, But I may go with a rearend out of a firebird.. I'm not really looking for a lot of power,, It will run don't get me wrong.. But I'm really building it to do some big show's around the US.. So Look's more then speed... Had to many fast cars... I want this one to look Bad...
Set no Limit's on yourself !!!!
''life is only a temporary assignment ''





27Likes
LinkBack URL
About LinkBacks
Reply With Quote


I know this is a little early but, this site is down more than it's up, so...................... Here's hoping everybody has a great holiday season and my best wishes for a great and prosperous new...
Merry Christmas and Happy New year