Quote Originally Posted by 2bubbas View Post

I checked center bolt on spring- OK- checked measurements side to side from cross member to spring center bolt- within a 1/8 inch- so anyone have any ideas why one wheel is back in wheel opening 1/2 to 3/4 of an inch- not centered- wife followed me and says it is not dog tracking so now what should I check-
Sometime in its 65 year life it could have had (1)a replacement fender or (2) been hit and the frame is trapezoidal or kinked or (3) the differential is bent or (4) spring mounts are installed back/forth in the wrong place.

If you can find a drive on lift, that along with a tape measure and a frame dimension drawing, spend an hour taking measurements.