have been getting a little done. went to a swap meet last week end and picked up some stock Harley Davidson feet rests and a pan hard bar for some thing. the feet rest should work for a good step to get into the T sense the body is about a 1' off the ground and the pan hard bar will get shortened to fit on the back of the T. I got my old school 3'' donut rubber mounts from speed way the other day, but I can figure out how they mount. I know the top plate that comes from the engine mounts on top of the big donut on the 7/16'' part of the bolt, but cant figure out if the lower plate that comes from the frame mounts on top of the big washer or under it. also dont know what size to drill the hole. if anyone could clear that up and give me some pictures of how they mount that would keep progress going. thanks