Quote Originally Posted by rspears View Post
John,
Do you know how they attached the "boxes" to the rear of the panel? I'm assuming that they covered the panel, including rolling material through the slot to finish the hole, then attached the upholstered boxes to the back side. I've got about 1.5" of depth to work with on the doors, but I'm struggling with mounting methods.
Morning Roger .......... as I said, I don't know if you'll be able to use our method .......... but here's what we did ....

The side panels were cut from 1/2" plywood, thus allowing for anchoring depth .......... the "boxes" were fabricated with a 3/8" lip on them to facilitate attachment ......... screw holes were then drilled through the lip ........... then the boxes were covered (lip and all) and the position of the screw holes was marked on the upholstery .......... velcro was used to make the first attachment and to hold the "boxes" in place while 7/16" long screws were driven through the holes into the 1/2" plywood ........ the depth of the attachment was controlled with washers

We were lucky to have such a large amount of space to work with ........ the pics will show you the depth of the bulkhead behind the doors and how tall we were able to make our attachment brackets .......... don't know if you'll have that luxury

John