Possibly the last "build" thread ........

[jerry clayton]

you need to display it with a door open so THEY can see the interior----glad I could help!!!!

Door fit problems-----they aren't working on it setting on jack stands????if the vehicle isn't going to be setting on the tires/wheels/suspension on a ppretty well FLAT floor---just have it on 3 stands/points as that way there won't be any twist/binding.

[Old Coyote]

you need to display it with a door open so THEY can see the interior----glad I could help!!!!

Door fit problems-----they aren't working on it setting on jack stands????if the vehicle isn't going to be setting on the tires/wheels/suspension on a ppretty well FLAT floor---just have it on 3 stands/points as that way there won't be any twist/binding.

This door fit problem is becoming a nightmare ......... he had the doors aligned beautifully with the body attached to the chassis ........... then the body was taken off so both it and the chassis could be finished & painted ........... after the firewall was corrected with the body on stands, Josh noticed the doors no longer fit .......... so he re-aligned them (I questioned the logic behind that move but it had already been done) ............ now that everything is painted and the body has been re-attached to the chassis, the doors no longer line up correctly ........... go figure

In fairness to Josh, this has been the only mistake during the entire build ......... just hope it doesn't keep us from making the show