That should be a good, durable finish and it looks great too!
Printable View
That should be a good, durable finish and it looks great too!
No area left undone! Came out looking like a nice undercoating! Almost like what we call Rhinoliner! It does look gray!
Quote:
Originally Posted by Dave Severson
Yeah i'm pretty happy with it Dave, should last well.
.
Quote:
Originally Posted by stovens
Yes Steve its very much like that.
.
:cool:Looks good,Steve..Should hold back the stones from chipping the underside..:cool: Looking forward to the next instalment..;)
Great idea. I am firmly planting that idea in the memory banks!
Got the body back on last night, once it was bolted down I blew out all the dust that had acumalated, once it was all clean i brushed and rollered a coat of blue epoxy on the inside to seal it, this is something i do with all my cars as it gives a nice clean finish when your working inside the car.
http://i65.photobucket.com/albums/h2...ps64350ee2.jpg
http://i65.photobucket.com/albums/h2...ps45b8170c.jpg
http://i65.photobucket.com/albums/h2...ps09dcf072.jpg
http://i65.photobucket.com/albums/h2...ps26dfdebf.jpg
.
Great to see it going back together with the shiny parts! I like that epoxy idea as opposed to my bare fiberglass. Wish I had seen this idea about two years back.... Oh well, on the next one, right?
This is getting to the exciting phase!
Yes Roger it stops them little bits from sticking in ya and eliminates dust, cheersQuote:
Originally Posted by rspears
Yes Lynn this is the nice bit, cheersQuote:
Originally Posted by rumrumm
.
Weather great again today so more fitting up, It amazing how a bit of nice weather lets you get so much done.
First job was to get the cage back in the car, I knew I had to cut holes for the rear legs and they had to be big as they have a stub with a flange on them. A hole was cut and the legs put through and loosly bolted in, then some cover plates were made up to cover the holes, they will be sealed when i get some more sealer, rear bulkhead has to be sealed for regs.
http://i65.photobucket.com/albums/h2...psc8d3859a.jpg
http://i65.photobucket.com/albums/h2...psec518750.jpg
http://i65.photobucket.com/albums/h2...psf95bb739.jpg
http://i65.photobucket.com/albums/h2...ps62945f61.jpg
http://i65.photobucket.com/albums/h2...ps3b079622.jpg
While I was there I decided to bond in some ply around the rear windows for the trimmer to attach the headliner too, This will have a full interior like a gasser should have.
Unfortunately I ran out of ply to do the other side :(, its bonded in with fibreglass paste
http://i65.photobucket.com/albums/h2...ps6efe6a15.jpg
Cage all back in and bolted up.
http://i65.photobucket.com/albums/h2...ps6cb4141f.jpg
http://i65.photobucket.com/albums/h2...ps46357e6c.jpg
http://i65.photobucket.com/albums/h2...ps40b51da6.jpg
.
on the down hill side
I don't know Charlie..........................you know how fond of shiny brother Steve is. Looks to me like he's got a LOT of color sanding ahead to get that underside and inside buffer ready.;):LOL:
Quote:
Originally Posted by cffisher
At last Charlie, I like this bit the best :LOL:
.