Not much to show as most of it is the boring stuff at the moment and this detail stuff can eat up a fair bit of time but i did get around to making the master cylinder look a bit better, I was originally going to chrome the body but after 1/2 way through polishing i decided to paint it.

Master cylinder is new Raybestos unit from a 1955 F100 truck

First off got all the roughness off it and ground off the lettering and sticky out bits and put on 3 coats of epoxy primer, next 2 coats of Green TI hibuild, then it was all rubbed down and 3 coats of my special mix 2k white applied, its matches the firewall.

The cap was made on a CNC mill and is fashioned after a aircraft cap, this was hollowed out and glued to the original cap with 2 pack epoxy glue. Once set it was given a nice shine on my polisher.

The outlet of the cylinder was 1/2" UNF and you can't get a stainless fitting to 3AN so i spun one up on the lathe and drilled and tapped the centre to take a 3/8" stainless banjo fitting & bolt.

I wanted to add a lanyard to the cap and found some stainless bicycle brake cable, I'm well pleased how it came out