Ditto what Dave said. Glad you are enjoying some car time.
Printable View
Ditto what Dave said. Glad you are enjoying some car time.
I really dig that car Barnsey!!! I rather enjoy watching your progress. Keep up the good work.
Time flys when your having fun lol
got a chance to get back out in the shed on sunday and today, first i spent 4 hours cleaning up the shed, then I dragged my rear guards out of the garden shed and stripped them back to metal, there must have been an inch of bog all over them, I fitted them up to the car and re bogged where the stepped joint is where they have been widened and skimmed a bit where it needed it, they came up pretty good and shouldnt need too much work to finish,...........well that was before i decided that now is as good a time as any to get the grinder out and fix something that has been nigleing at me since i first got the car, the back guards needed opening up a little, I sat and looked at the guard and looked at the grinder for some time before getting up the courage to make the first cut lol, I started thinking if i really needed to do this, then i thought its now or never lol so i cut a bit out and put a bit back in lol
now all i have to do is do the same to the drivers side then pull them off and clean the insides of them up then smooth them and get them ready for paint,
it sure makes a difference being able to find the tools you need and not to be tripping over everything :D
http://i7.photobucket.com/albums/y28...rguards003.jpg
http://i7.photobucket.com/albums/y28...rguards010.jpg
http://i7.photobucket.com/albums/y28...rguards008.jpg
http://i7.photobucket.com/albums/y28...rguards011.jpg
http://i7.photobucket.com/albums/y28...rguards013.jpg
http://i7.photobucket.com/albums/y28...rguards021.jpg
Matches the radius of the tire much nicer now! Good work!
Yeh definitely looks better,nice work.
Looks a lot better.. I have done that a few times but welded in a 1/4" or 5/16" rod to creat the radius on the edge. Your almost there, and I know about the triping over things :LOL::LOL::LOL:
yeah i was going to do that but its a public holiday and everything was closed, if i put it off who knows when i would have done it, now theres no turning back and i will have to repeat the prosess on the other guard, I ended up trimming out a bit more from where i cut the piece out then welded the piece that i cut out back in, that moved it all back about an inch, just need to remove the guard from the car and dress the welds at the top of the radius, i cant weld upside down lol it will be much easier when its not on the car and i wont have to worry about the grinder cutting my tyre.Quote:
Originally Posted by cffisher
cheers barnsey
It looks good now, nice and even, but I can't help but think that the rearend was just an inch too far back. If the rear was moved forward you would have had a nice tight fender/tire gap. It's just personal preference, but I prefer not to see the top of the tire. As it is now, if you lower the back of the car at all you'll lose the even gap between the tire and fender.
the tyre was bigger than the opening, and being 15x10 inch wide rims i had to lever it in and out of the opening whenever i removed the wheel and every time i did it i had to bend the rear of the guard and leaver it over each part of the tread, when i fit the coilovers i should be able to get the rear of the car down a few more inches. :) that should fill the guards a bit more.
barnsey
finished getting both rear guards in high fill tonight, then repaired the front guard that fell from the roof of the car and landed on top of the tail shaft yoke, things are moving forwards again :D
cheers barnsey
http://i7.photobucket.com/albums/y28...rguards005.jpg
http://i7.photobucket.com/albums/y28...rguards007.jpg
http://i7.photobucket.com/albums/y28...uards008-1.jpg
http://i7.photobucket.com/albums/y28...rguards015.jpg
http://i7.photobucket.com/albums/y28...rguards018.jpg
http://i7.photobucket.com/albums/y28...rguards001.jpg
http://i7.photobucket.com/albums/y28...erfirce014.jpg
http://i7.photobucket.com/albums/y28...uards010-1.jpg
Lookin' good Barnsey, Just a small ding sure does slow you down, huh???
the fun part starts tomorrow, lots of elbow grease dry rubbing them all down and getting them ready to undercoat and in there first coat of color, once all of the panels have the first coat of color i will spend a day wet sanding the whole car and all of the panels then hopefully get the final coat of color and clear top coat on the car the next day, still one more front guard to repair, then its onto the hood and 3 more doors inside and out, i am going to finish coat all of the inside of the doors and door shuts including clear coating them first so i can start getting the outside ready for final paint.
I am going to try and get all of the paint finished by mid may or there abouts, then its onto the wiring and trim, still lots to do but if i keep spending time in the shed after work instead of in front of the TV or computer i should start to see some results.
cheers and thanks for the comments.
barnsey
Fenders came out real nice. I hate the paint and sand part(mostly because I don't do it well!) :)
finished painting today and the last three days inside and out :D:D
http://i7.photobucket.com/albums/y28...paint003-1.jpg
http://i7.photobucket.com/albums/y28...paint001-1.jpg
http://i7.photobucket.com/albums/y28...paint005-1.jpg
a couple of pics wet sanding with 600 grit.
http://i7.photobucket.com/albums/y28...rspaint010.jpg
http://i7.photobucket.com/albums/y28...rspaint012.jpg
http://i7.photobucket.com/albums/y28...paint004-1.jpg
http://i7.photobucket.com/albums/y28...paint005-2.jpg
http://i7.photobucket.com/albums/y28...rspaint008.jpg
http://i7.photobucket.com/albums/y28...rspaint009.jpg
http://i7.photobucket.com/albums/y28...rspaint011.jpg
http://i7.photobucket.com/albums/y28...paint001-2.jpg
here's a few pics, its hard trying to get a decent pic in the shed with the different lights and the flash on the camera keeps going off and changing the color lol
cheers barnsey
http://i7.photobucket.com/albums/y28...arcoats051.jpg
http://i7.photobucket.com/albums/y28...arcoats004.jpg
http://i7.photobucket.com/albums/y28...arcoats012.jpg
http://i7.photobucket.com/albums/y28...arcoats029.jpg
http://i7.photobucket.com/albums/y28...arcoats039.jpg
http://i7.photobucket.com/albums/y28...arcoats023.jpg
http://i7.photobucket.com/albums/y28...arcoats003.jpg
http://i7.photobucket.com/albums/y28...arcoats018.jpg
http://i7.photobucket.com/albums/y28...arcoats016.jpg
http://i7.photobucket.com/albums/y28...arcoats002.jpg
http://i7.photobucket.com/albums/y28...arcoats005.jpg
http://i7.photobucket.com/albums/y28...arcoats006.jpg
http://i7.photobucket.com/albums/y28...arcoats022.jpg