Thread: my 48 Vauxhall

Tweet

Looks a lot better.. I have done that a few times but welded in a 1/4" or 5/16" rod to creat the radius on the edge. Your almost there, and I know about the triping over things

Originally Posted by cffisher

Looks a lot better.. I have done that a few times but welded in a 1/4" or 5/16" rod to creat the radius on the edge. Your almost there, and I know about the triping over things

yeah i was going to do that but its a public holiday and everything was closed, if i put it off who knows when i would have done it, now theres no turning back and i will have to repeat the prosess on the other guard, I ended up trimming out a bit more from where i cut the piece out then welded the piece that i cut out back in, that moved it all back about an inch, just need to remove the guard from the car and dress the welds at the top of the radius, i cant weld upside down lol it will be much easier when its not on the car and i wont have to worry about the grinder cutting my tyre.
cheers barnsey