Thread: Engine Swap - '92 5.0EFI/AOD into '66 Ford F100....

Tweet

Originally Posted by randyr

Thanks Matt! Good idea! So, probably any pre-EFI Ford with a canister will have the vac solenoid?

I think so. I just did a quick rockauto search. 1982 Ford Granada with 200 I6 brings up some that look like they will work Bout $10 each. I'v never actually had to replace one of these ( seen quite a few ) but it should do just what you need.
1982 FORD GRANADA Vapor Canister Purge Valve.

Originally Posted by Matt167

I think so. I just did a quick rockauto search. 1982 Ford Granada with 200 I6 brings up some that look like they will work Bout $10 each. I'v never actually had to replace one of these ( seen quite a few ) but it should do just what you need.
1982 FORD GRANADA Vapor Canister Purge Valve.

That valve has 3 hose connections. Where would they hook up? Current canister has 2, one hose from tank and one hose to intake with in-line electrical purge solenoid.....

Originally Posted by randyr

That valve has 3 hose connections. Where would they hook up? Current canister has 2, one hose from tank and one hose to intake with in-line electrical purge solenoid.....

it goes in line with the evap line that normally runs to the intake. So it has an evap in and an evap out port. It replaces the electrical purge solenoid which should have 2 hoses coming out of it