Thread: Fixing a strange engine noise and then some

Tweet

Originally Posted by IC2

Will do if Summit wont take them back - they have just been removed from the packaging and cleaned of the preservative.

It was a nice try - but sometimes things just don't work out according to 'plan'.
I've forgotten - do you have pedestal style heads or stud? If pedestal, I have the 1.7 Cranes which will be sold regardless.

Currently have stud mount on the TFS heads. Are both sets 1.7? I'm figuring I can use 1/2 of a set and "balance out" or increase flow numbers between intake and exhaust. I believe what is on there now are cranes...

Originally Posted by 34_40

Currently have stud mount on the TFS heads. Are both sets 1.7? I'm figuring I can use 1/2 of a set and "balance out" or increase flow numbers between intake and exhaust. I believe what is on there now are cranes...

Mike - luckily - the Comps are wending their way back to Summit. Replacement Cranes should be here tomorrow and if my DW hasn't scheduled my time too tightly, might even get them installed and possibly, just maybe, get in a short ride, that is "assuming" the push rods are OK length wise and if not, Pat and I will be discussing the next step.

Originally Posted by IC2

Mike - luckily - the Comps are wending their way back to Summit. Replacement Cranes should be here tomorrow and if my DW hasn't scheduled my time too tightly, might even get them installed and possibly, just maybe, get in a short ride, that is "assuming" the push rods are OK length wise and if not, Pat and I will be discussing the next step.

That is good news! I'll keep my fingers crossed it all comes together for you!