Thread: Fixing a strange engine noise and then some

Tweet

Originally Posted by IC2

Pat - thanks for the info on the Millers. Since I had never heard of them, just good info.

After I do my rocker mod, and if I need new push rods for proper contact, how long will it take to get them and an approximate cost - they will be 5/16" dia, ball ends and 6.272 and probably plus or minus .020 -.060? If necessary, we'll do the final via PMs/email

well i can get sizes 6.225...6.250..(6.272)...6.300...6.325.. i would have to call and see what ones they stock 6.250..6.300 are stocking numbers others they may have on shelf just have to call when you need them .they have a 24 hour turn around. other place i deal with on push rods go by 050 up or down .from 6.250 so next would be up 6.300 then 6.350 then down 6.200 then 6.150 has for price . both are 080 wall harden one pice push rods. not ball tip. the first company listing will 210 the tips. other listing will not 210 the tips. but do stock them in some sizes with a 210 tip .i would have to call on them at time need see were i can get the size you need. the last push rod company that only sells them in 050 increments is abit less money still good pushrods . if you want more pre load the push rod needs to be longer then 6.272 if that is what you have now?? as for cost i help you out. PM me when the time comes .or go to my shop web page and email me or just call the shop Cell number 989-667-4071 . i keep this phone on all the time