Thread: 302 Stroker??

Tweet

I haven't done a thing with them yet.. I hope to modify the trans valve body this weekend and get the setup into the frame. I've also been searching for a distributor to use. Everything I've found so far won't clear the intake. I may have to get "creative".... we'll see.

Originally Posted by 34_40

I've also been searching for a distributor to use. Everything I've found so far won't clear the intake. I may have to get "creative".... we'll see.

Mike,
Looking back at the pictures I'm assuming your problem is the diameter of the distributor body as opposed to the height? Regardless, Edelbrock uses a small body, short cap Mallory distributor on their ProFlow XT's where the throttle body hangs out over the top. Mallory does not acknowledge the part number, as it's packaged for Edelbrock but it's theirs. Summit shows several small body Mallory units for the SBF engines if height is not the problem - FORD 5.0L/302 Mallory Ignition Distributors - SummitRacing.com