Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: Hone question
          
   
   

Reply To Thread
Page 2 of 2 FirstFirst 1 2
Results 16 to 24 of 24
  1. #16
    pat mccarthy's Avatar
    pat mccarthy is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Apr 2005
    Location
    bay city
    Posts
    10,546

    Quote Originally Posted by Dave Severson View Post
    I've ran Fords for years, can't imagine what you would use or why you would possibly run a hone in a cylinder for 45 mins!!!!! More concerned about the finish then the time......
    if you run a hone in a stock 302 block for 45 min non stop you will put so much heat in the bore it will look like a old coke bottle them bores like to get out and move around a weee bit
    Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip

  2. #17
    Dave Severson is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Jul 2003
    Location
    Madison
    Car Year, Make, Model: '67 Ranchero, '57 Chevy, '82 Camaro,
    Posts
    21,160

    [QUOTE=DennyW;359567]((We put the low tension oil rings in the 501 this winter, ask me in a couple months how I like them....))

    So how do you like them Dave ?

    QUOTE]

    So far so good on the ring set up.....Going to do a leakdown on it some night next week just to see how things are inside....
    Yesterday is history, tomorrow is a mystery, Live for Today!
    Carroll Shelby

    Learning must be difficult for those who already know it all!!!!

  3. #18
    pat mccarthy's Avatar
    pat mccarthy is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Apr 2005
    Location
    bay city
    Posts
    10,546

    with out deck plates 003 under piston to wall i hone wet with sunnen AN stones i like the soft stones with my machine i run the 131 stones up to less then 002 .then a AN 200 stone up to 001 .then a AN 300 to size then 4 strokes with a sunnen plateau brush that run on the AN head or on bigger bores i use a brush . if deck plate i will hone about 004 out . as for time it takes to hone one hole to size that as alot to do with bore size the make up of the iron . there is cool down so the holes do not move . i hold my bore tapper under 0003 i bore any thing that comes thru my door last week was a 3 hole geo tracker engine was like a toy.i bore harley jugs bore and hone them with TQ plates if i am taking just out .010 i hone them not bore them and that moves out good with the 131 stones but they break down fast but is the best stones for moving iron out of the bore if not cutting it out with the boring bar. i like to bore i do alot of V8s bbc and sbc i am setup to deck plate them from 4.00 to 4.625 :LOL i put sleeves in as well with my boring bar . but the honing is the back killer
    Last edited by pat mccarthy; 08-08-2009 at 01:26 PM.
    Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip

  4. #19
    Dave Severson is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Jul 2003
    Location
    Madison
    Car Year, Make, Model: '67 Ranchero, '57 Chevy, '82 Camaro,
    Posts
    21,160

    [QUOTE=DennyW;359567]((We put the low tension oil rings in the 501 this winter, ask me in a couple months how I like them....))

    So how do you like them Dave ?

    QUOTE]

    Denny,---

    Did the leakdown check on the 501, not a lot of passes this year due to some tranny issues (Flowerglide, to be expected).... Anyway, after 60 passes, less then 4% leakdown on the worst (#7) cylinder with the gapless / low tension ring combination!!!!! Good news for me!!! Guess it works on big blocks, too!!!!!!!! Can't really positively say what it did for performance, made a few other changes on the engine last winter besides just the rings.....
    Yesterday is history, tomorrow is a mystery, Live for Today!
    Carroll Shelby

    Learning must be difficult for those who already know it all!!!!

  5. #20
    Dave Severson is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Jul 2003
    Location
    Madison
    Car Year, Make, Model: '67 Ranchero, '57 Chevy, '82 Camaro,
    Posts
    21,160

    Quote Originally Posted by DennyW View Post
    ((less then 4% leakdown on the worst (#7) cylinder with the gapless / low tension ring combination!!!!!))


    Sounds like the low flutter is working on the rings. Less than 4%, the performance is there with those results. Just the fine tuning would make a difference on the performance then..
    What the car needs is a tranny that lives!!!!! More performance isn't really necessary, already have to throttle stop the dang thing to keep it at 9.90!!!! Or, find a bunch more money and run 8.90's!!!!

    The way money is these days, guess I'll just be happy that we can afford to still run a car!!!!!!
    Yesterday is history, tomorrow is a mystery, Live for Today!
    Carroll Shelby

    Learning must be difficult for those who already know it all!!!!

  6. #21
    pat mccarthy's Avatar
    pat mccarthy is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Apr 2005
    Location
    bay city
    Posts
    10,546

    well i work in RA with iron bores with silicon carbide to a 12 RA then a ultra -finsh plateau brush. works for me over a 100+ bores cant be wrong
    Attached Images
    Last edited by pat mccarthy; 08-13-2009 at 06:31 PM.
    Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip

  7. #22
    Dave Severson is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Jul 2003
    Location
    Madison
    Car Year, Make, Model: '67 Ranchero, '57 Chevy, '82 Camaro,
    Posts
    21,160

    Well, if the car were all mine, I'd lose that frickin' glide in a heartbeat and go with either a G-Force or a Lenco!!!!! Just run Quick 8 and leave the throttle stop at home.....unfortunately, it's not all mine....nor am I the one stuck with all the tranny bills!!!!!!!
    Yesterday is history, tomorrow is a mystery, Live for Today!
    Carroll Shelby

    Learning must be difficult for those who already know it all!!!!

  8. #23
    pat mccarthy's Avatar
    pat mccarthy is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Apr 2005
    Location
    bay city
    Posts
    10,546

    Quote Originally Posted by DennyW View Post
    From what I can see in the picture, that's about the way I like mine, depending on rings used of course.
    yep thats about the std hone job with me i use it on the air cool engine could not tell you what ring they use moly or just iron. up to the big bore hp stuff and the stock builds i do . i have customers reuse ring sets with good luck so i not going to try any thing new
    Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip

  9. #24
    hotrodstude is offline CHR Member Visit my Photo Gallery
    Join Date
    Jul 2009
    Location
    pendergrass
    Car Year, Make, Model: 2006,ford,f-150,v-6,5-speed manual
    Posts
    245

    that what ford states in there manuals. i've never done it that way but i do use the courser stones and varsol.have not done any i a few years. is varsol still avaible?????

Reply To Thread
Page 2 of 2 FirstFirst 1 2

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink