Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 
Like Tree20Likes
  • 2 Post By stotzbotz
  • 3 Post By shine
  • 1 Post By jerry clayton
  • 2 Post By Henry Rifle
  • 3 Post By 34_40
  • 1 Post By stotzbotz
  • 3 Post By JL350
  • 4 Post By rubyrides

Thread: Follow up to FE 390 Valve Guides leaking after rebuild. Got my heads back again.
          
   
   

Reply To Thread
Results 1 to 12 of 12
  1. #1
    stotzbotz is offline CHR Member Visit my Photo Gallery
    Join Date
    Mar 2016
    Location
    Tallahassee
    Posts
    74

    Follow up to FE 390 Valve Guides leaking after rebuild. Got my heads back again.

     



    Well I just got my heads back today for the second time. Horribly I couldn't retrieve them without giving the machine shop $711.00. And that was with the owner saying that he gave me a break on the bronze valve guides which he said were normally $25.00 apiece. He charged me $5.00 apiece. He claimed that the valves looked good and that if they were his he would run the car without replacing them. We argued back and forth about what he should have done when the heads were brought in the first time although no matter what was said he was in the right and I was in the wrong not telling him to replace them in the first place. I think that these places sometimes take advantage of folks like me who hand them something and say "Can you please check these heads out and take care of any problems you may find?" Having now shelled out $1000.00 + for these heads to be worked on and still not have new valves seems high to me but maybe that's a fair price. Just thought I'd let you guys know the outcome. Now it's time to get this puppy back together and hopefully enjoy blasting down the road without looking like the mosquito control guy. Happy weekend to you folks
    NTFDAY and rspears like this.

  2. #2
    shine's Avatar
    shine is offline CHR Member Visit my Photo Gallery
    Join Date
    Nov 2003
    Location
    bluff dale texas
    Car Year, Make, Model: 47 inderweed
    Posts
    2,109

    i'd be raising bail money.

  3. #3
    jerry clayton's Avatar
    jerry clayton is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2006
    Location
    Bartlett
    Posts
    6,831

    I think you have mis interepted the conversation once again---

    However , you still have spent less than if I'd done them-----
    NTFDAY likes this.

  4. #4
    Henry Rifle's Avatar
    Henry Rifle is offline CHR Member Visit my Photo Gallery
    Join Date
    Apr 2004
    Location
    Little Elm
    Car Year, Make, Model: 34 Ford Low Boy w/ZZ430 Clone
    Posts
    3,890

    Without being critical, I think "Do what you think needs to be done" without getting an estimate is an invitation to disappointment.
    NTFDAY and 34_40 like this.
    Jack

    Gone to Texas

  5. #5
    NTFDAY's Avatar
    NTFDAY is online now CHR Member Visit my Photo Gallery
    Join Date
    Aug 2003
    Location
    Springfield
    Car Year, Make, Model: '66 Mustang, 76 Corvette
    Posts
    5,333

    Why don't you post the name of this fine individual and the name of his shop so others on this board that live in your area can avoid him?
    Ken Thomas
    NoT FaDe AwaY and the music didn't die
    The simplest road is usually the last one sought
    Wild Willie & AA/FA's The greatest show in drag racing

  6. #6
    34_40's Avatar
    34_40 is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2007
    Location
    New Bedford
    Car Year, Make, Model: 34 Ford 3W Coupe Replica
    Posts
    14,606

    How is it the shops fault?
    Fella walks in and drops off the parts and says "do what needs to be done".... He just gave that shop Carte Blanche to do whatever they wanted!

    What he needed to say was, please disassemble, inspect and in X number of days I'll return to discuss the plan to repair.

    Upon returning, had he decided to also replace the valves, it would be his option. As the owner of the parts.. he should get the final say.

  7. #7
    stotzbotz is offline CHR Member Visit my Photo Gallery
    Join Date
    Mar 2016
    Location
    Tallahassee
    Posts
    74

    First of all thanks for the comments but some of you may not understand the situation here. I took these heads in several months ago and asked the guy to check them out since they had been in the cars trunk for nearly 20 years. I told him to replace the valve seals and check that the valves are functioning properly and let me know what needed to be done in order for the heads to do their job properly. After he had them for about a week he called and told me 2 exhaust valves were not sealing properly and needed to be replaced. He was also going to resurface the heads and give them a bath. Nothing else was mentioned as needing to be done. Now the average person would think that after getting these heads back they were ready to use. I would not have installed them had I thought otherwise. You folks that are serious re builders or machine shop owners of course may be much more intelligent than me but I would think that part of the job of checking these heads out is examining the valve guide clearance and letting me know if replacing the guides is needed. Why would I specifically need to request that to be checked? This should be part of the inspection process in my opinion. I would have paid to get it done at the first visit and not had to break my engine down and take them in a second time wasting my time and spending more money on fresh gaskets and fluids. The place is called Competition Racing Engines or CRE on South Monroe in Tallahassee, Florida by the way.One of the last things this guy said to me as I was leaving is that he needs to get out of this business which I don't think is the best statement to make to a customer disgruntled or not.
    NTFDAY likes this.

  8. #8
    jerry clayton's Avatar
    jerry clayton is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2006
    Location
    Bartlett
    Posts
    6,831

    I have 2 ways to service valve guide clearance issues in older heads---------If they are worn a little, you can knurl the id -there are different types of knurling tools and a big difference in results. After any guide work I finish hone the id with a Sunnen diamond one pass hone tool.
    Valves can be replaced with oversized stems to make up the difference that the service work has made the guide straight and round but will be oversize.

    You can use a guided pilot step drill that will drill guide oversize for installing a brass liner and then use a swedging tool and the resizing methods above.

    You can drill out the head and install a completely new guide with an interference fit od for either stock or thinner(lightweight) stemmed valves-------and size the id to the valve as above

    Guides replaced are usually only .502 od so will need a special size seal.

    I looked online and couldn't find anything good about this shop --don't know why anyone internet savvy would of went there-----

    Takes about $80,000 of equipment to service cylinder heads----------

  9. #9
    rspears's Avatar
    rspears is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Sep 2007
    Location
    Gardner, KS
    Car Year, Make, Model: '33 HiBoy Coupe, '32 HiBoy Roadster
    Posts
    10,988

    stotzbotz I hope that you don't let the negative comments outweigh the positives and run you off. I for one have enjoyed your postings as you've chased this problem, and I hope that you'll stick around and close the loop as you get the engine back together and on the road again. I'm looking forward to you posting the next chapter.
    Roger
    Enjoy the little things in life, and you may look back one day and realize that they were really the BIG things.

  10. #10
    JL350 is offline CHR Member Visit my Photo Gallery
    Join Date
    Jun 2004
    Location
    South Hedland
    Car Year, Make, Model: SS commodore
    Posts
    31

    Stotzbotz good stuff, hopefully the problems are all sorted. If not keep chasing them down, the guys here have plenty of good advice most probably learnt the hard way.

    You won't be the first or last to have to redo a job like this or worse, most have probably been in the same position and learnt from it.

    Good luck with it.
    techinspector1, NTFDAY and rspears like this.

  11. #11
    jerry clayton's Avatar
    jerry clayton is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2006
    Location
    Bartlett
    Posts
    6,831

    My comment about the cost of equipment had nothing to do with an expected cash flow from customers-My equipment was all bought to support my racing and being able to do STUFF that the general shops out there weren't equipped or trained to do. Also MY equip for head work didn't cost $80k, but probably would today----------

    I'll try to do some pics of some guide sizing tooling over the next few days and hopefully get them posted.

  12. #12
    rubyrides is offline CHR Junior sMember Visit my Photo Gallery
    Join Date
    Jun 2016
    Location
    tacoma
    Posts
    2

    just registered to maybe help with your smoking problem if i am going over old ground i apologize in advance.. I had a similar issue caused by a leaking intake manifold. it seems cj ports do not play well with PI intakes nor did they work with an offenhauser manifold prior to the PI.

    the clue was that my valve stems were covered in carbon from burnt oil might make one think the guides were bad but no not the case . It was sucking oil from the valley at the btm of the intake. my cure was to go back to the oem cast intake even at that it took awhile to burn out the oil in the exhaust system. sure hated giving up that aluminum pi manifold but it just would not seal . Had the same problem with the previous manifold and rebuilt the motor to fix the smoking problem only to have it still smoke with the PI on it ..

    so check out your sealing area at the btm of the the ports as i dont know what your combination is i cant say much about it but thats where my problem was. if your heads were milled that could also cause a problem with the intake

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink