Quote Originally Posted by jerry clayton View Post
Pat-----------just picked up a Kwik way FWS2 boring bar to use from surface plate on bell housing mount to rough bore the billet splayed bolt caps before align honing----------got a friend with a shop who does that on a lot of industrial type blocks so I'm going to try it on these caps/blocks---I'll let ya know how it goes---when it gets warmer so I can work----
DMC tech /sunnen sold a upright line boring bar that center on the bell sunnen rep told me they did not sell many but did not takeup much space . i done many line bore jobs with the tobin arp T/A 14flat top with the lacey willams cutter bit it can do a very nice finish. the T/A set up mic only reads .0005 so getting under that .what i done many times .you can not have any one in the shop and you must become one with the mic there not much feel with the mic i blue it so i know were i at by the mark the cutter mark