Thread: 352 FE performance questions?

Tweet

67FordKC; My book does not show a 352 made in 1967.
It only shows the 352 going too 1966.
1964 had the highest compression rating at 10.5 to 1
and that was on a factory 4V.
I don't show any HP rating for the 352's in my book which is odd.
I am guessing but I would say that it is around 300 HP.
A 390 with 10.5 to 1 is at 315 HP. just to give you an idea.
I hope this helps if you know what your compression was we could get a better idea.
Kurt

The engine is the original engine in a 1967 Ford F-100 pickup, this was the last year that I put the 352 in the pickup. In 68 they used the 360. As far as getting heads from Edelbrock I had called them around a year ago to ask this very question. I did call them back to be sure and they repeated the same answer as before. The mininum bore needed is 4.050 and mine is at 4.030 so they will not work. If I had known this I would have it bored to the another .020, but to late for that. Does any one know where I can get 352 HI-PO heads? Or would having my current heads ported be the same? Thanks for your help and suggestions!!!