Thread: I think I found one...

Tweet

did a set cut them out for bigger valves and built a 554 cid and used in a hill and hole mud running class . abit small for the engine some would think. but theres not much that can keep up with it i have been told . i done some of the dove c heads. with the 429 cast stock new piston with a dish i would not use less for show very . very low boost and i still would not do it every one wants more then before you know it the pistons will be seting in the oil pan or on the ground . you looking at a JE piston or what ever you like in a forged piston .i think if your looking at a flat top with a 429 crank that it would be way to hi for a blower or a 460 crank and a inverted dome piston you can find one in shelf built so other then that your looking at a custom piston any way you go your looking at a invertred dome pistons on boost