Thread: new cam for 429

Tweet

i would look at a solid roller cam if in mud use and to the hi side of 5000+rpm i just did do alot of work on a set of the dove c head put the cleveland valves in them with 2.250 and 1.710 a cam that may work good would be 246/254 @050 lift 640/640 on 110 your stall may need to be abit more .but in low lock you may get away with it ? i use erson cams that what that cam is a shelf cam #e260901 lifters rl957 springs 3850 #220@1950 open 580 lbs a custom roller can be ground with hyd lifters with rl963 lifters but are $$ thats why i would run the solid roller as well there abit less $$ and will take the rpms ..better if your past 5000 alot . the last two 460 i did i used a solid roller both off road sand snow mud racing