What kind of flow numbers, machining and valve hardware do you get for $600?

We recently ported some D0VE heads for a guy with a little old 429. He wanted a 12 second car and the heads were the last thing to be added. Our ported heads put him in the 11's in his firstever pass and without any tuning or sorting.

Just did another set for a jet boat guy with a bone stock 460 engine. Pulled his heads and replaced them with our ported D0VEs. Result: 95HP increase. That's with no other changes and with the stock cam; imagine how much more HP that could have been with a camshaft change that takes advange of the port work, etc.

Our D0VE heads can support in excess of 600 HP on naturally apirated engines. My business partners have managed quarter mile passes in the 7-second range with oem block, oem crank, oem C8VE heads and with stock used main bolts and stock used head bolts...estimated at 1800HP.

We are not as cheap as the other guys...nor are we the most expensive. We are about in the middle and definitely "bang-for-buck." We have hundreds of heads in stock and can offer them outright or with an exchange. Go to our website and check us out:

www.highflowdynamics.com/

Paul