Thread: Fan Belt

Tweet

Originally Posted by jrschlae

Thanks Denny. Very good idea going with a half inch belt.I had a feeling that the 3/8 was kind of wimpy.

if you want the 3/8" belt. you could use denny's site to figure out that gates coding for 3/8" is 67 so just go to gates site www.gates.com and type in 6756 into the parts search, you will come up with it. I found out that parts coding for belts worked like this monday, these # are for Gates, Dayco which makes for Napa uses a simmilar coding but the width codings are diffrent. this info should make custom sizing belts a lot easier for people that know about it.

that being said. 1/2" belt would be be better.