Quote Originally Posted by 93F250
Over 3500k it hauls and putting around its ok but give it too much gas and get into the secondaries and it bogs or stumbles then starts to pick up.
Quote Originally Posted by techinspector1 View Post
3000+ means 3500. And I doubt seriously that your motor has between 10.0 and 11.5:1 static compression ratio. Do you know the static compression ratio? Do you know the squish/quench?

Bottom line: You have over-cammed the motor.
Tech's spelled it out clearly, and your post actually says that the engine is doing pretty much what it should be doing, but would likely be stronger if your compression ratio was boosted and you were running aluminum heads and high octane gas to handle detonation. Seems like you've got some changes in your future, but you need to know your base before you start throwing more $$$ into the pit. Assuming your screen name (93F250) is the vehicle in question, dropping a SBC into a Ford truck is where your problems started..... (just kidding, just kidding).