Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 
Like Tree11Likes
  • 2 Post By techinspector1
  • 3 Post By Nuckingfuts
  • 2 Post By rspears
  • 1 Post By techinspector1
  • 1 Post By jerry clayton
  • 1 Post By Rdobbs1977

Thread: Distributor Install Help
          
   
   

Results 1 to 7 of 7

Threaded View

  1. 04-16-2018 09:01 PM #1
    Nuckingfuts
    Nuckingfuts is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Nov 2017
    Location
    San Jose
    Car Year, Make, Model: '73 C10 Shortbox
    Posts
    54

    Distributor Install Help

     



    I'm installing an HEI distributor in a sbc 350 and need a bit of help...

    The motor is at TDC on compression for #1 (timing mark exactly on zero). I can get the distributor to fully seat with the rotor tip pointing in either two positions shown in photo below but not sure which is correct or if it matters. FYI, rotor tip is currently pointing towards 'B' in the photo. Can someone please help?

    Distributor.jpg
    Last edited by Nuckingfuts; 04-17-2018 at 07:16 AM.
    Reply With Quote Reply With Quote

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink