Thread: HEI-4 pin Crank-Trigger bypass?
Results 1 to 2 of 2
Threaded View
-
04-19-2009 11:05 AM #1
HEI-4 pin Crank-Trigger bypass?
IM working on a low budget race progect,got lot's of spare parts,my question is with a HEI 4pin Distributor you are supposed to hook the MSD box to the DIST,and remove the GM module.I wan't to ad a crank trigger and use a Blaster coil not the in cap HEI coil.Run crank trigger wires violet/green to MSD box,orange/black to blaster coil,so the only wire going to the DIST will be the coil wire from coil to the Dist cap.I don't no if this will work bypassing the HEI Magnetic-pickup trigger,
there is no such thing as used parts for a pinto so i had to create some .. i searched ebay for a similar clutch pedal setup and found a mid 90`s ford ranger to be the closest thing i could work...
random stuff