Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: HEI-4 pin Crank-Trigger bypass?
          
   
   

Reply To Thread
Results 1 to 2 of 2
  1. #1
    FIDO's Avatar
    FIDO is offline CHR Member Visit my Photo Gallery
    Join Date
    May 2006
    Location
    Columbus
    Car Year, Make, Model: 1985 Monte Carlo SC 454 BB
    Posts
    133

    HEI-4 pin Crank-Trigger bypass?

     



    IM working on a low budget race progect,got lot's of spare parts,my question is with a HEI 4pin Distributor you are supposed to hook the MSD box to the DIST,and remove the GM module.I wan't to ad a crank trigger and use a Blaster coil not the in cap HEI coil.Run crank trigger wires violet/green to MSD box,orange/black to blaster coil,so the only wire going to the DIST will be the coil wire from coil to the Dist cap.I don't no if this will work bypassing the HEI Magnetic-pickup trigger,

  2. #2
    FIDO's Avatar
    FIDO is offline CHR Member Visit my Photo Gallery
    Join Date
    May 2006
    Location
    Columbus
    Car Year, Make, Model: 1985 Monte Carlo SC 454 BB
    Posts
    133

    YEP,it worked.just have to check Rotor phaseing now.

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink