Thread: HEI-4 pin Crank-Trigger bypass?
-
04-19-2009 12:05 PM #1
HEI-4 pin Crank-Trigger bypass?
IM working on a low budget race progect,got lot's of spare parts,my question is with a HEI 4pin Distributor you are supposed to hook the MSD box to the DIST,and remove the GM module.I wan't to ad a crank trigger and use a Blaster coil not the in cap HEI coil.Run crank trigger wires violet/green to MSD box,orange/black to blaster coil,so the only wire going to the DIST will be the coil wire from coil to the Dist cap.I don't no if this will work bypassing the HEI Magnetic-pickup trigger,
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
04-25-2009 05:20 AM #2
YEP,it worked.just have to check Rotor phaseing now.
lack of oxygen for sure! and like horse theft, abandoning a boater in distress would get you hung here in New England! With small children to boot!
Old vintage coolest boat...