Thanks DennyW for the links. I am learning from them, but this is a slow process for me.

tl34ru...you sound like you have done this a few times. I truly appreciate your expertise. I will check the vacumm tonight and let you know what it is. I just replaced the cam and haven't re-checked it since.

Craig Moates suggested I adjust the Injector Flow Rate from 22 to 28 and now the BLM is reading 108. Since it is 108 and everything I have read says I should want 128, does this mean I am running too rich?

Yes I am using AutoProm and I can send you a file I recorded today after the IFR was adjusted if you like.

Thanks again to both of you for all your help!