Thread: carb spacers
-
05-18-2005 08:03 PM #16
Of course you're right dr, but the fun is in the building...PLANET EARTH, INSANE ASYLUM FOR THE UNIVERSE.
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
05-23-2005 04:42 AM #17
Tyler, they did that to the intake to make it work a little better at higher rpms...more like a single plane. It doesnt work great, but probably helps a little. Best thing is figure which one will work the best for you and go for it. It's always a little trade-off, you cant have both ends at 100%. As far as the cold blooded engine, mine does that too...nothing to do with the cam really, but your choke should take care of the problem. Is it working? Electric or manual? With a little choke when cold, and the little cam thing that steps up the rpm's when cold, you should have no problem. Could be as simple as a carb adjustment. John (sorry, didnt mean to hijack the post!)When your dreams turn to dust, Vacuum!
well I decided to do another mod to gain max travel of bars past the intended travel points just for that peace of mind. 1/8 inch is to close so now I'll have 1/2" or better. I cut a 3/16" wall...
New Project