Results 1 to 12 of 12
Threaded View
-
08-11-2004 01:55 PM #9
#1 on cap but ya gotta be at TDC #1
pull spark plug out on #1 cyl. (driver side front) hold your finger over the hole and have someone bump the starter till ya feel compression, now line the balancer mark up to 0 on the tab, your now at TDC#1 index the distributer rotor to point to # 1 on the cap and it should run, then set timing to specs......





LinkBack URL
About LinkBacks
Reply With Quote
Turn out the lights, the party's over THIS PLACE IS DEAD!
Dead!