Take a look at the Performer EPS on the Edelbrock site. From all of the info it seems like the way to go.

"This small-block Chevy manifold has a runner design that’s “tuned” for peak torque around 3500 rpm on a 350-inch engine and it’s ideal for power from off-idle to 5500 rpm. Dyno tests showed gains of 5 hp and 9 ft/lbs of torque over the Edelbrock Performer manifold #2101 on a 350 Chevy. From 3000 to 4500 rpm, the increases averaged 5+ ft/lbs. of torque for more performance where you need it most"