Thread: Edelbrock Performer RPM

Tweet

Hi try looking at

http://www.nucwa.com/page2.html

I was more interested in the fact that he uses a Melling MTC-1 cam and I found out that is the Melling version of the Edelbrock Performer-plus cam, but he has a Performer RPM manifold and some performance data. You have to go to the third page of his site to see the SBC 350 with the Performer RPM and this started from a thread called "HP and Torque" (I Think), but if you can't find the thread from about 10 days ago he can probably repeat his data for you, he gets about 15 mpg and low 14 times in the 1/4 mile and there were two estimates of about 280 HP. His replies were quite civil and informative! He says his coupe is a little over 3000 pounds.

Best Wishes,
Don Shillady
Retired Scientist/teen rodder