9Likes
Results 1 to 7 of 7
LinkBack URL
About LinkBacksThreaded View
-
01-27-2024 06:31 AM #1
CHR Member
- Join Date
- Feb 2007
- Location
- Vidalia
- Car Year, Make, Model: 1946 Ford Coupe, 1962 Austin Healey 3000
- Posts
- 1,499
Can anyone identify this 3-barrel throttle body? Possibly marine
I got this throttle body in a box of parts that reportedly came off of a marine BB Chevy. It does not have a hole for a central air cleaner stud. It has two holes near the edge and may have had a flame arrestor type of cleaner.
It is billet and appears to be very well made and has almost no wear. The linkage is progressive and very heavy duty. The IAC looks to be a GM part but I haven't pulled it off yet. It is missing the TPS.
It was in a box with a Delphi type marine ECU and harness. I would like to use this TB on a project with a Holley ECU. It looks entirely usable with a few minor mods and I really don't need to know the manufacturer, but it would be nice to have some info on it.
Several internet image searches have come up empty for me and I thought someone on here might recognize it.
There are no markings on it that I have found, so far.
Last edited by Hotrod46; 01-27-2024 at 06:45 AM.
Mike
I seldom do anything within the scope of logical reason and calculated cost/benefit, etc-
I'm following my passion
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Building a 1937 Caddy with a LS 2 engine. Looking at the exhaust system and wondering if I really need to put an X or H pipe in the system or can I just go straight dual exhaust. Will performance be...
Exhsust system