Thread: Can anyone identify this 3-barrel throttle body? Possibly marine

Tweet

Just a follow up for anyone interested. I finally got a break on a Google image search.

It was either sold and/or made by Accel before they were acquired by Holley. I found it from another smaller company also. It went through some redesigns but was always 3-barrel. I think mine is an early model since the linkage looks to have gotten cheaper built over the years.

It is supposed to use GM IAC's (I can confirm that) and TPS sensor. It is rated at 1350 cfms so it's pretty big. I thought so due to the size of the secondary butterfly.

Thought I would post this since I find it frustrating when a poster never comes back with a solution.

Thanks to those that took time to look.

Thanks for coming back with the details you found! I sent the pics and a description to a young gun EFI Tuner that I know, asking if he'd ever seen it before since he does cars, hot sand buggies & boats (the big cigarette's running a pair of big V8's), but didn't get a reply. It's a unique piece!