Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 
Like Tree9Likes
  • 2 Post By jerry clayton
  • 2 Post By NTFDAY
  • 1 Post By 29fordcoupe
  • 1 Post By 34_40
  • 2 Post By jerry clayton

Thread: Help identifying engine whine.
          
   
   

Reply To Thread
Results 1 to 11 of 11
  1. #1
    29fordcoupe is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2017
    Location
    Helotes
    Posts
    5

    Help identifying engine whine.

     



    https://www.youtube.com/watch?v=pd83HhRwGuA

    This video shows the engine whine I'm trying to diagnose. The noise is much louder in person than you can hear in the video. The longer you listen to the video, the more you can begin hearing the whining sound.

    I tried a (very short) test, removing the accessory drive belt and the Whine continues even when alternator and water pump are not spinning. There are no other accessories.

    I'm going to probe it with a stethoscope today and see if I can narrow down the location. It was suggested on another forum to unbolt the torque converter and push it back so I can isolate the noise to engine or trans, so I'm going to try that today.

    Any other suggestions are greatly appreciated.
    Thanks!

  2. #2
    rspears's Avatar
    rspears is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Sep 2007
    Location
    Gardner, KS
    Car Year, Make, Model: '33 HiBoy Coupe, '32 HiBoy Roadster
    Posts
    11,009

    First, welcome to CHR.
    Your noise sounds like the transmission pump or torque converter to me. If you have a good independent tranny shop near by they will likely be able to tell you quickly, and maybe just from the video you posted. Just my thoughts, early and on the first cup of coffee.
    Roger
    Enjoy the little things in life, and you may look back one day and realize that they were really the BIG things.

  3. #3
    jerry clayton's Avatar
    jerry clayton is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2006
    Location
    Bartlett
    Posts
    6,831

    do you have chain or gear drive timing gears for camshaft???sounds like a cheap gear drive and you are focused on front portion of engine-------
    NTFDAY and rspears like this.

  4. #4
    29fordcoupe is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2017
    Location
    Helotes
    Posts
    5

    To me, the sound seemed like it was coming from the front, but it is really hard to tell.
    I bought this car from someone else who bought the car, builder is unknown.
    Haven't had it very long.
    The only info I got from seller was that it was supposed to be a 350 crate engine.
    The engine has no casting number or stamped numbers, but it has 333882 heads on it.

  5. #5
    NTFDAY's Avatar
    NTFDAY is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2003
    Location
    Springfield
    Car Year, Make, Model: '66 Mustang, 76 Corvette
    Posts
    5,339

    Jerry hit it on the head. That sure sounds like a gear drive to me and if it were mine I'd tear it down and install a true double roller timing set.
    glennsexton and HOSS429 like this.
    Ken Thomas
    NoT FaDe AwaY and the music didn't die
    The simplest road is usually the last one sought
    Wild Willie & AA/FA's The greatest show in drag racing

  6. #6
    HOSS429's Avatar
    HOSS429 is offline CHR Member Visit my Photo Gallery
    Join Date
    Jun 2007
    Location
    New Market
    Posts
    2,584

    i`m with Jerry .. sounds to me like a gear drive .. some guys do that on purpose just for the noise .. it can sound like a blower if your engine is covered .. i wish you had blipped the throttle a time or two ..
    iv`e used up all my sick days at work .. can i call in dead ?

  7. #7
    29fordcoupe is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2017
    Location
    Helotes
    Posts
    5

    Engine is an older build.
    I did some stethoscope probing on it today, and the noise seems the very loudest at the bell housing.
    So maybe it is the transmission pump.
    I'm going to try disconnecting the torque converter and pushing it back as suggested, just didn't get to that today.

  8. #8
    29fordcoupe is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2017
    Location
    Helotes
    Posts
    5

    The alternator is where I originally assumed the whine was from. I already replaced the alternator.
    Then I started trying to diagnose it.

    I did a short test run with the accessory belt removed, so neither the alternator or water pump was spinning and it still had the whine.

    I was hoping it was just timing gears, but its starting to look like tranny pump.

  9. #9
    29fordcoupe is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2017
    Location
    Helotes
    Posts
    5

    tranny test

     



    I took off the cover and unbolted the torque converter from the engine, and pushed it back. Started the engine and the whine is still there, just as loud.

    Did some probing with the tranny disconnected and now the sound seems loudest at the timing gear cover. So for now I'm going to chalk it up to loud timing gears and just driver it till I either get used to it or it starts getting worse.

    I'm just a little too OCD for strange engine noises.
    34_40 likes this.

  10. #10
    34_40's Avatar
    34_40 is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2007
    Location
    New Bedford
    Car Year, Make, Model: 34 Ford 3W Coupe Replica
    Posts
    14,615

    The left knob on the radio can always fix those noises.. 8-)
    29fordcoupe likes this.

  11. #11
    jerry clayton's Avatar
    jerry clayton is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2006
    Location
    Bartlett
    Posts
    6,831

    The only thing about an engine that is a steady sound ( not an intermitten click, knock, tap ) is a GEAR related sound that comes from improper contact angle or clearances of mesh lines---------it is a cam gear drive issue and either live with it or change to a chain set up-------In that car it would be a snap to replace it
    NTFDAY and 29fordcoupe like this.

Reply To Thread

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink