Quote Originally Posted by Bob Parmenter View Post
Hmmmmm, hope that works well enough. The last 14" I tried on an SBC with Walker rad AND shroud was marginal, and we don't get mega hot here. Sounds like your engine might be mounted a bit low in the chassis.
I hear you on the diameter, and it kind of surprised me but the pan to block interface is just about dead even with the top of the frame - the frame mounts are dead level with the top of frame side to side. Now perhaps there's a different engine mount option? These from the PO are of course chrome plated bling bling mounts from Energy Suspension - http://www.summitracing.com/parts/en...make/chevrolet