8LikesThread: SBC Help - Water Pump & Pulleys
Results 1 to 15 of 33
LinkBack URL
About LinkBacksHybrid View
-
09-15-2014 01:23 PM #1
CHR Member
- Join Date
- Apr 2001
- Location
- Salado
- Car Year, Make, Model: 32, 40 Fords,
- Posts
- 10,898
Hmmmmm, hope that works well enough. The last 14" I tried on an SBC with Walker rad AND shroud was marginal, and we don't get mega hot here. Sounds like your engine might be mounted a bit low in the chassis.Your Uncle Bob, Senior Geezer Curmudgeon
It's much easier to promise someone a "free" ride on the wagon than to urge them to pull it.
Luck occurs when preparation and opportunity converge.
-
09-15-2014 02:30 PM #2
CHR Member/Contributor
- Join Date
- Sep 2007
- Location
- Gardner, KS
- Car Year, Make, Model: '33 HiBoy Coupe, '32 HiBoy Roadster
- Posts
- 11,243
I hear you on the diameter, and it kind of surprised me but the pan to block interface is just about dead even with the top of the frame - the frame mounts are dead level with the top of frame side to side. Now perhaps there's a different engine mount option? These from the PO are of course chrome plated bling bling mounts from Energy Suspension - http://www.summitracing.com/parts/en...make/chevrolet
Originally Posted by Bob Parmenter
Roger
Enjoy the little things in life, and you may look back one day and realize that they were really the BIG things.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
".......So sanded it all down and resprayed. ......" Been there. done that on a couple of paint jobs over the years. Usually took me a couple of days to get over being mad before I started...
Stude M5 build