Hey guys,,I know the amount of flack I'm going to get for doing this,,,so don't crucify me,,last week I installed one of the PROCOMP,,115gph,7psi electric fuel pumps,,I installed it in the right location,,I used the fittings supplied with it,,I used Permetex thread sealer,,basically,,I did everything according to recommendations and supplied instructions.Yesterday,,I was doing a tune on my monster,,and I kept smelling gas fumes,,and I kept checking all of my connections,,and finally found the problem,,,it appears to be the actual body of the pump is cracked and is leaking.Has anyone dealt with the same issues with these pumps.I was hoping that it was the bottom seal that was leaking but it seems up higher on the body of the pump.Now,,it's working great,,other than the fact it's dumping fuel.I don't run alcohol,,I don't run anything that would deteriorate the seals,,so,,just wondering,,is this common,,and if someone has had problems with these,,did you find a way to fix it or should I just go and get another pump and be done with it.