Hey Guys,,thanks for the replies,,,well,,I decided to go back mechanical,,I went out today and got a Carter circle track pump,,and I'm going to bolt it up tomorrow,,I do not even know why I got the wild hair to hook an electric up,,to this engine.I've been using a mecahnical for the last 5 years,,,and I got around a bunch of locals here,,that all told me I should go electric,,,that I would be a lot happier,,,well,,,first off,,,the damn thing was so loud it was drowning out the engine noise,,,and two,,,well,,y'all know what 2 is,,,and to respond,,,NO,,I didn't over-torque the unit,,I made sure of that,,,I'm thinking I picked the wrong spot on the frame to mount it.I figured midway on the frame shouldn't be a bad place,,,but I'm thinking that it just wasn't fastened down well enough to stop vibrations.So,,like I said,,,I went out today and purchased a 100gph,,8psi,,mecanical,,,and I'm calling it fixed.Thanks again for everyones advice and responses.