Thread: TA Blues part II........
-
03-08-2004 09:53 PM #1
TA Blues part II........
Didnt know if you guys would continue posting to the last thread so I started anew........The filter that was on the TA when I got it blew the seal when I first put it together, now 2 filter and about 10 Qts o crude later, its did it again, I hoped it would be somethin simple, maybe not. engine seems to be running OK, gotta get my elec fan wired and a thermostat in there next. I reseated the rubber seal on the filter and tightened it as tight as I could by hand, it seems to be working for now, we'll just have to wait and see......thanx for all of your help..........
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
03-09-2004 04:13 AM #2
What oil pressure do you have at startup and during normal operation?
Abe
-
03-09-2004 05:09 AM #3
Try turning the filter another 1/4 turn beyond finger tight with a filter wrench. There is a bypass valve that opens if the filter is plugged so it shouldn't blow the seal unless the bypass is stuck or the filter is too loose.
AL" Im gone'
I met my wife at a singles dance. I was quite surprised, as I thought she was at home with the kids.
the Official CHR joke page duel