Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: engine
          
   
   

Results 1 to 2 of 2

Threaded View

  1. 03-03-2004 01:35 PM #2
    HWORRELL's Avatar
    HWORRELL
    HWORRELL is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Oct 2003
    Location
    ST.LOUIS
    Car Year, Make, Model: 31 FORD 5 WINDOW,69 442, 305 sprint car,
    Posts
    1,410

    Here ya go.... cam gear 20 ft.lbs.
    rod bolts .. 45 ft.lbs.
    main caps all except rear 80 ft.lbs. rear cap 133 inch pounds,then tap crank forward then back with lead hammer to seat thrust bearing then retourqe all caps to 80 ft.lbs.
    crank end play--- .002 to .006
    balancer---70 ft.lbs.
    intake---35 ft.lbs.
    head bolts--use sealer on threads tighten in 3 steps to 67 ft.lbs.
    oil pump--65 ft.lbs.
    Last edited by HWORRELL; 03-03-2004 at 01:38 PM.
    Reply With Quote Reply With Quote

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink