engine

i need torqe reading for a 89 camaro engine (stock305).im rebulding a 73 nova and im puting that engine in it.im also rebulding that engine. im puting roller tip everthing.and i need the readings.if any one has them please send them to my email .its my moms catlvr@netzero.com.

Here ya go.... cam gear 20 ft.lbs.
rod bolts .. 45 ft.lbs.
main caps all except rear 80 ft.lbs. rear cap 133 inch pounds,then tap crank forward then back with lead hammer to seat thrust bearing then retourqe all caps to 80 ft.lbs.
crank end play--- .002 to .006
balancer---70 ft.lbs.
intake---35 ft.lbs.
head bolts--use sealer on threads tighten in 3 steps to 67 ft.lbs.
oil pump--65 ft.lbs.