Thread: LT1 Engine stopped while running

Tweet

This is what it looks like after you get the balancer off.

Originally Posted by sfort

This is what it looks like after you get the balancer off.

I did not expect that. The picture says it all. Thank you.

I have acted on all the good advise. The voltage tests show no voltage. The relays and fuses were replaced. The harmonic balancer was particularly dificult because of the rust from the salt used in the area in the winter. I had to make a hydraulic puller to remove the balancer as the pictures showed. I replaced the opti spark distributor, still no joy. I have just aquired a cpu from a suppositly runnable junk yard car. I will install it next time I am able to drive the 75 miles to where the car stopped. If this does not work I am going to pull the LT1 engine and replace it with an older engine. I am allowed to do this because the Chevy is a 1994 that does not require a computer scan to pass New York state inspection. Possibly I should have given up on this car, but I like older cars.

Dozer