Thread: Embarrassing trip today

Tweet

Good news and info for us SBF guy's .

Pat Mc - the dowel drive pin just arrived about 10 minutes ago.
Six freaking days since you mailed it!!!
I had no idea that Michigan was somewhere outside of the solar system - and I'm originally from Michigan.

Thanks for sending it off to me - I'm sure it will get used eventually

Originally Posted by IC2

Pat Mc - the dowel drive pin just arrived about 10 minutes ago.
Six freaking days since you mailed it!!!
I had no idea that Michigan was somewhere outside of the solar system - and I'm originally from Michigan.

Thanks for sending it off to me - I'm sure it will get used eventually

that pin is the long of the two every one sends out with new cams. every one is pbm .erson. howard s .well Hell they should send out 3 pins as the long one i sent you is no good... with the solid eccentric just fond that out on this 289 roller engine over the week end to short . just order a longer pin 1.500 was going for a old drill

Since the pony express took so long and a drill bit was sacrificed for the good of all, I even had some time to crawl underside to do some new car tightening and other odds and ends - decided I really didn't like how I had run the gas line - so off to Summit for some more AN fittings - I already have enough3/8" SS and -6 braided line.

Pat - I just found that McMaster Carr has 5/16x1.500 dowel pins @25 for~$8.00 or so and are 20,000 pound alloy steel. Next order there, I'll get a box if for no other reason - just to have themWho knows, maybe I can use them in a slingshot to assassinate my excess squirrel population

Now, if we could just convince Ford to supply dowels with their camshafts