Quote Originally Posted by pat mccarthy View Post
sorry and i did send it out to just take a cheap drill and chop it down .it needs to be about 1.340 long i just did one the pins are not very hard the long one is 1.375 and did hang out .035 so i face it on the valve grinder stem grinder side.OH .. but i not using a eccertric ...so i been no help to you at all
Pat - not a problem. I'll just put it away for the next motor. Since it was raining today, I did a bunch of other things. And yeah, after I posted the last, I did cut down a new 5/15 drill that I had - wasn't thinking - drill rod = drill bits. Interesting - that 'E' camshaft needed a 1.5" pin to instead of the 1.375 to bottom and not miss the eccentric.